TM4-P4250 HiFlux

HiFlux Magnetic/Bag Filter Units are used where there is a need for a complete solution for removal of magnetic particles and combine the advantages of magnetic and bag filtration.

HiFlux Units are used for partial flow filtration in district heating and cooling installations, as both magnetic and non-magnetic particles of less than 1 micron can be retained in the filter.

Partial flow filtration is used where there is a requirement for continuous flow, also during filter cleaning. Efficient removal of dirt and magnetic particles from the liquid reduces the number of breakdowns in the system and increases the life of measuring equipment, heat exchangers, pumps, valves and other components significantly.

In partial flow filtration 5-15% of the total flow is led out of the system and pumped through the magnetic/bag filter, and is then led back to the system –cleaned of sludge and magnetite. As the partial flow filter is not located in the main circuit, the flow through the filter can be interrupted and the filter cleaned without interrupting the main flow.

Continuous reduction of the sludge content reduces sedimentation in heat exchangers, pipes and other components, helping to keep heat transmission performance at a maximum and reducing corrosion in the system. Error indication in mechanical measuring equipment and errors in connection with inductive measuring are also minimised, which is why it is possible to achieve more reliable energy consumption measurements.

The magnetic bars in the filter are located in conducting pipes which lead the liquid through a magnetic field generated by magnets with changing polarity. This induces a field around even the smallest particles and so provides efficient retention of particles of less than 1 micron. The filter will actively retain ferromagnetic particles and some iron oxides of the Fe3O4, g-Fe2O4, d-Fe2O3type and other mixed oxides of Fe3O4, where the spinel structure FeO is sub-stituted by other oxides, e.g. CoO, MnO, NiO, ZnO, Cr2O3.

Non-magnetic particles are retained efficiently in the filter bag. (See also data sheet for filter bags).

Capacity 2,4 - 210 m3/h
Filtration 1 - 100 µm
Pressure 10 or 16 bar

Product specifications

TM4-P4250-HiFlux

The HiFlux TM4-P4250 HiFlux Unit is designed as a complete unit for partial flow filtration in heating and cooling systems with a flow of 150-480 m³/h in the main line.

The filter unit accommodates current standards and norms for pressure vessels, complies with the EMC directive and is CE-labelled. The unit is supplied complete with pump and filter with a magnetic bag insert fitted compactly on a galvanised base frame.

Capacity: at 1 cSt and 10μm filtration:

  • TM4-P4250 HiFlux Unit:     24m³/h at 7,5 mVs (design flow)

The integral unit is fully tested and is quick and easy to install.

A differential pressure indicator can be fitted as an optional extra. The filter has also been prepared for installation of a trickle circuit for connection of a pH electro-de for an automatic chemical dosage system

Additional information

Filtration

30 – 2000 µm

Pressure

16 bar

Kapacitet

4,5 – 243 m3/h

You may also like…

I want to hear more

Find a HiFlux distributor near you

HiFlux Filtration A/S has specialised in providing filter solutions for industrial purposes. The company offers more than 20,000 combinations within the range of standard filters. At the same time, numerous special tasks are solved – customised to the demands of the individual customers. Therefore, advise and problem solving are important activities of our company.

Find a distributor