HiFlux Auto-line® filters are designed as compact self-cleaning automatic filters with a wide range of applications for various types of liquids. The sturdy construction of the filter makes it well suited for industrial and hygienic applications in which operational reliability and dependability are essential.
The industrial Auto-line® filter is used in many sectors such as paint, cooling water, waste water, technical water, heat exchanger, chemicals, resins and energy sector. The hygienic Auto-line® filter is used in sectors such as: various cheese products, chocolate, coffee, honey, egg, beverage, oil and fats, sugar and CIP liquids.
The Auto-line® filter is used when an automatic continuous cleaning process is required. The impurities are being concentrated in the filter, until it is drained away, while the filter is still in operation the liquid loss due to cleaning is minimal.
The Auto-line® filters are also available as R-E versions, where the scraping process is driven by an electric gear-motor or as the P version, where the scraping process is driven by a pneumatic actuator. The E filter versions has an extended pneumatic cylinder, so that cross contamination between the liquid to be filtered and the pneumatic system is avoided.
In the design of the filter it was very important to make the construction robust and reliable. By limiting the number of moving components, wear and maintenance requirements are minimized. The simple construction makes the filter very easy to service, since there is no need for external service assistance or special tools. Furthermore, the compact design of the filter is making it suitable for locations, where the height is a limitation.
Special versions can be supplied according to customer requirements.
Typically different connections, temperature and pressure levels.
Check out these new animation videos and see how the filters are working and learn more about the advantages of a self-cleaning filter solution.
HiFlux Auto-line® filters are manufactured of stainless acidresistent steel. The filter meets current standards and norms for pressure vessels, complies with the Machinery directive. The filter is CE labelled when the filter complies with relevant legislation.
The filter can be delivered ready for installation, complete with electronic controller and automatic drainvalve.
The Auto-line® filter solutions has a wide range of addons, such as: lifting device, sluice system, flush valves, de-air valve, heating jacket, sealings, inverter, pressure sensors, legs, wagons and much more.
| Filter vessel and element: | EN 1.4404 steel |
| Design pressure: | 10 bar (16 bar) |
| Test pressure: | According to EN 13445 |
| Max differential pressure: | 3-7 bar |
| Max working temperature: | 150°C (Fluid grp. 2 and vapor pre. < 0,5 bar) |
| Volume: | 15,0 liters |
| Weight: | 60 kg |
| Power supply (for R-E version): | 3 x 400V, 50 Hz |
| Air supply (for R-P version): | 6 bar, filtered |
| Flange connection: | DN65 EN1092-1/11 |
| Drain: | Nipple Rp2 |
| Drain chamber volume: | 0,9 liters |
| Filtration: | 30-50-100-150-200-300-500-1000 micron |
Customized solutions can be manufactured upon request.
| Diff. pressure | Strainer area cm² | 30 * | 50 * | 100 * | 150 * | 200 * | 300 * | 500 * | 1000 * |
|---|---|---|---|---|---|---|---|---|---|
| 0,05 | 1.500 | 12 | 14 | 22 | 24 | 24 | 24 | 24 | 24 |
| 0,10 | 1.500 | 15 | 18 | 28 | 31 | 31 | 31 | 31 | 31 |
| 0,15 | 1.500 | 19 | 23 | 36 | 37 | 39 | 39 | 39 | 39 |
| 0,20 | 1.500 | 24 | 27 | 44 | 45 | 47 | 47 | 47 | 47 |
Capacity (m³/ h) at different filtration rates (µm).
The filter should only be installed as a pressure filter in systems which have a positive overpressure (the surroundings must be taken into consideration). All Auto-line® filters are standardly produced according to the pressure equipment directive 2014/68/EU article 4, section 3. The filters can be delivered with approval according to category I, II, III or IV. The Auto-line® filters complies with the Machinery directive 2006/42/EC. Auto-line® filters can be delivered with approval for use in explosive atmospheres (Equipment-category 2, zone 1) according to directive 2014/34/EU.
The Auto-line® filters for hygienic use complies with the Declaration of conformity for Food contact materials EC1935/2004 for all elastomers and polymers. HiFlux Filtration A/S is a member of EHEDG and follows the guidelines from the European Hygienic Equipment Design Group.
I would like to hear more
Choosing the right filters for your business requires specialized knowledge and our competent employees are ready to hear about your company’s needs, so that we can find the right solution together.
In some cases, the solution will be one of our many standard filters. In other cases, the filtering task requires us to customize the filters to meet the needs of your business. At HiFlux Filtration A/S’s technical department, engineers and technical developers with years of experience work on matching the right filters to the industry’s specific requirements.
If you want to get a quote for a filter you can fill our our inquiry form here.
Fields marked with * are required
"*" indicates required fields
Receive our latest news and stay updated. Make sure to read our privacy policy
© 2024 HiFlux Filtration A/S – Designet af Aveo web&marketing
We will setup contact between you and our partner. ‘
Fill out the form, and we will take care of the rest.
