Hytrex™ depth cartridge filters

Features and Benefits

Thermally bonded micro fibers create a strong secure cartridge thattraps particles throughout its depth. Hytrex combines efficiency, longlife and purity to create a high performance depth filter.

  • Pure polypropylene construction
  • Fast rinse-up in high purity applications
  • Wide chemical compatibility
  • Automated packaging for a clean finished product
  • NSF Standard 42 certified

Applications

  • High Purity Chemicals
  • Oil & Gas
  • Bottled Water
  • Electronics
  • Pre-treatment for Reverse Osmosis

High Dirt Holding Capacity

  • High dirt-holding capacity means longer life and fewerchangeouts, saving time and money
  • True-graded density captures particles throughout entire filterdepth
  • Lower density at the surface of the filter with progressively higherdensity toward the center
  • No surface blinding, which reduces flow and increases filterchangeouts

Wide Range of Lengths and Adapters

  • Standard lengths fit most housings—custom lengths can also beprovided
  • Wide range of polypropylene end-adapters including gaskets,extended cores and GE patented self-seal polypropylene springs

Dimensions

Nominal O.D. = 2.5″ (6.4 cm) Nominal I.D. = 1″ (2.5 cm)

Capacity
Filtration
Pressure

Product specifications for Hytrex depth cartridge filter

Additional Information

Hytrex cartridge filters are made from thermally-bonded fibers ofpolypropylene. GE certifies that it uses no resin binders, lubricants,antistatic or release agents or other additives in the manufacture ofthese cartridges, and that the resein used for manufacturing thefilter media meets the food contact requirements of U.S. FDA21CFR regulations. When required, specify only FDA compliantsealing materials and end adapters.

GE filter cartridges are designed and manufactured for resistanceto a wide range of chemical solutions. Conditions will vary witheach application and users should carefully verify chemicalcompatibility. Please contact your GE distributor for moreinformation.

*) Data based on 10” length filter with clean water.

hytrex-skema filter

*) Data based on 10” length filter with clean water.

Ordering Information

If you are ordering Hytrex filters with standard ends (with no adapter on either end), select one designation from each of the first three columns. YourProduct Order Number will look like this: GX05-291/4. If you are ordering Hytrex with one or more end adapters, select designations from all applicablecolumns. Your Product Order Number will look like this: GX05-29 1/4 YYP or GX05-29 1/4 XK

* Santoprene is a registered trademark of Advanced Elastomer Systems, L.P.
** Viton is a registered trademark of DuPont Dow Elastomers

Additional information

Filtration

30 – 2000 µm

Pressure

16 bar

Kapacitet

4,5 – 243 m3/h

You may also like…

I want to hear more

Find a HiFlux partners near you

HiFlux Filtration A/S has specialised in providing filter solutions for industrial purposes. The company offers more than 20,000 combinations within the range of standard filters. At the same time, numerous special tasks are solved – customised to the demands of the individual customers. Therefore, advise and problem solving are important activities of our company.

Find partners